Evaluation of Gate Valve Flanges: Serrated vs Non-Serrated Under External Loading

Anonymous — Tue, 30 Apr 2024 22:09:33 +0000

Evaluation of Gate Valve Flanges: Serrated vs Non-Serrated Under External Loading Anonymous (not verified) Tue, 04/30/2024 - 16:09

Project Title: Evaluation of Gate Valve Flanges: Serrated vs Non-Serrated Under External Loading

Industry Partners: Denver Water

CIEST Personnel: Cory Ihnotic and Jessica Ramos

Primary Investigator: Prof. Brad Wham

Year: 2024

The intent of this study is to investigate the difference between a serrated faced flange connection and a non-serrated faced flange connection; mainly to determine whether one would leak sooner than the other. To evaluate this, a series of four-point bending tests with applied axial load were conducted on Mueller Resilient Wedge Gate Valves. The tested specimens were commercially available 6 in. (150 mm) diameter ductile iron pipe conforming to AWWA C600 standards, which were provided by Denver Water. Each type of flange connection (serrated or non-serrated) received two tests, each with displacement applied at a rate of 1 in. (25 mm) per minute. For the conducted tests, several points of interest were located including the site of the first and second leaks, and their respective leak rates to determine which of the connections had a more substantial failure.

Appreciation is extended to John Daly and Katie Ross, along with all our pipe and coupling manufacturers, for their tremendous support.

Testing Report

Link to testing report: /center/ciest/sites/default/files/2025-03/240820%20DW-Serrated%20vs%20Nonserrated__Final%20Draft_v2.pdf

Off

Traditional

White

Performance Assessment of iPVC Pipe and Coupling for Large Ground Movement

Anonymous — Tue, 15 Nov 2022 07:00:00 +0000

Performance Assessment of iPVC Pipe and Coupling for Large Ground Movement Anonymous (not verified) Tue, 11/15/2022 - 00:00

Project Title: Performance Assessment of iPVC Pipe and Coupling for Large Ground Movement

Industry Partners: East Bay Municipal Utility District, Denver Water

CIEST Personnel: Nicholas Berty, Cory Ihnotic, Katherine O’Dell, Jessica Ramos

Primary Investigator: Prof. Brad Wham

Year: 2022

Project Summary: The intent of this study is to define the seismic response of iPVC pipeline systems with couplings and to illustrate procedures for interpreting laboratory results to seismically classify pipeline system performance following developing ASCE seismic guidelines. Twenty large-scale tests were performed on 6-in. diameter DR14 (PC305) iPVC pipe (C900) with five different commercially available reinforced connections. Test specimens were subjected to tension, compression, cyclic, and four point bending tests, determining the ultimate load capacity for each system in both axial and transverse directions. This study provides the first seismic classification for plastic pipe systems with reinforced connections.

Appreciation is extended to David Katzev and Katie Ross, along with all our pipe and coupling manufacturers, for their tremendous support.

Link to Report

The intent of this study is to define the seismic response of iPVC pipeline systems with couplings and to illustrate procedures for interpreting laboratory results to seismically classify pipeline system performance following developing ASCE seismic guidelines.

Off

Traditional

White

Materials Testing

Evaluation of Gate Valve Flanges: Serrated vs Non-Serrated Under External Loading

Off

Performance Assessment of iPVC Pipe and Coupling for Large Ground Movement

Off